Uvc Lamp Air

Posted in April 17, 2009 ¬ 1:17 amh.adminComments Off

Uvc Lamp Air

What is the most important part of your tanning bed? Why are the lamps of course! The bulbs provide light that produces ultraviolet tanning. Everything Else on your tanning bed is pretty much done to serve the lamps. Did you know that the quality of the tan you get using an indoor tanning bed depends directly on the spectrum of light produced by your lights? It is also interesting to note that tanning bulbs actually produce more ultraviolet light, you can receive from natural sunlight during the same amount of time.

The lamps are available in two basic styles (although there are hundreds types within these basic styles). A style is low pressure, and they are normally called tanning bed "lights". The other style is high pressure, and the bulbs are normally called "tanning."

Tanning bed lamps look almost as common fluorescent lights, long tubes that shine, and they produce both UVA and UVB. They are usually evaluated by the percentage of each they produce. Lamps Low pressure tend to lose their ability to produce UV light over time. Their useful life usually ranging from 300 to 1600 hours. "The Useful life "usually means that they still produce at least 70% to 80% of UV rays, they are designed to produce. They can really produce much natural light longer, until 5000 hours.

High pressure tanning bed bulbs are designed to produce only UVA rays. In reality, they produce also UVB and very dangerous ultraviolet rays, but it uses filters to block harmful rays. Tanning bulbs should never be operated without the filter required. In addition, they require special care during replacement and disposal. The typical lifetime ranges of tanning lamps at 300 10,000 hours.

The lamps must be as clean as possible because the dust blocks the UV rays. It is generally sufficient to dry fire about every 200 to 300 hours of use. Here's another interesting fact about tanning bed lamps. Their ability to produce ultraviolet light is actually affected by the air temperature around them. There is an optimum temperature range in which they provide the most UV light. Above or below this range of UV radiation produced decreases. So, in reality, the cooling system in your tanning bed is really designed to achieve this temperature range for the good of the lights. This is not to keep you cool.

So how often should you replace your lamps? Most tanning salons to replace all the lamps once a year. If you have a home tanning bed, lamp replacement is more likely to be necessary every three to five years. Of course, it depends on the life of your tanning lamps and the amount of use it gets.

Replacing your own lights is something you should learn to do. There is really no advantage to stay in charge of the tanning bed distributor and you should put a lot of money in the process. You can order your lamp online from a retailer specializing in parts and supplies. If you've done your shopping for a tanning bed, your lights should be fairly easy to replace. The main trick is to find the right model Lamps for your tanning bed specific.

It is important to replace all your bulbs at once. This is really not advisable to wait one to burn, then replace it. You get a much better price on your tanning bulbs if you buy in bulk. You may be tempted to buy cheaper lamps tanning bed you can find, but this is not a good idea. Quality will pay for itself in the long term, both in terms of lifetime bulb and Tan quality they provide. And a tan high quality is what it is that the first place, is not?

Jim McDonald is a creative writer and webmaster of http://www.tanning-beds.info, a great resource for choosing your next tanning bed. In depth information on indoor tanning lotions, tanning bed lamps, and used, wholesale, wolff, home tanning beds.

Article Source: http://EzineArticles.com/?expert=Jim_A._McDonald

Photopolymer plate Maker